|
SYS-2026T-URF4+ |
- SuperServer 2026T-URF4+ (Black)
|
|
|
CPU |
- Dual 1366-pin LGA Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Intel® Xeon® Processor X5600/E5600/L5600 Series
(Westmere) 40W - 130W
- Intel® Xeon® Processor X5500/E5500/L5500 Series
(Nehalem-EP) 38W - 95W
|
QPI |
|
|
|
Memory Capacity |
- 18x 240-pin DIMM sockets
- Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
- Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
- Memory Mirroring supported
|
Memory Type |
- 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
DIMM Sizes |
- 1GB, 2GB, 4GB , 8GB , 16GB
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
|
|
Chipset |
- Intel® 5520 (Tylersburg) chipset
- ICH10R
|
SATA |
- Intel ICH10R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Winbond® WPCM450 BMC
|
Network Controllers |
- 2x Intel® 82576 Dual-Port Gigabit Ethernet Controllers (4 ports)
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT 3 support for fast, scaleable, and reliable networking
- VMDq support for better performance of virtualization
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
Graphics |
|
Super I/O |
|
|
|
Left Slot |
- 1 Unversal I/O (UIO) Slot
- 1 (x8) PCI-E 2.0 slot
- 2 (x4) PCI-E 2.0 slots
|
Right Slot |
|
|
|
Serial ATA |
- Six Serial ATA ports
- Six SATA hard drives supported
|
LAN |
- 4x RJ45 LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB |
- 2x USB rear ports
- 1x USB on-board
- 4x USB internal headers
- Total 7 USB 2.0 Compliant
|
VGA |
|
Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
Serial Port / Header |
- 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header (Option)
|
|
|
BIOS Type |
- 32Mb SPI Flash EEPROM with AMI® BIOS
|
BIOS Features |
- Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
|
|
|
|
Form Factor |
|
Model |
|
|
|
Height |
3.5" (89mm) |
Width |
17.2" (437mm) |
Depth |
27.75" (705mm) |
Gross Weight |
55 lbs (24.9kg) |
Available Colors |
Black |
|
|
Buttons |
• Power On/Off button • System Reset button |
LEDs |
• Power LED • Hard drive activity LED • 2x Network activity LEDs • System Overheat / Fan Fail LED • Power fail LED |
Ports |
2x USB Ports |
|
|
Hot-swap |
- 16x 2.5" SAS / SATA Hot-swap drive trays
|
|
|
DVD-ROM |
Slim 8x DVD, 24x CD, DVD-ROM Drive |
|
|
1x 2U SAS / SATA backplane |
|
|
Fans |
|
Shroud |
|
|
|
920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2C |
AC Input |
- 100-240 V, 50-60 Hz, 11-4.5 Amp
|
DC Output |
- 4 Amp @ +5V standby
- 75 Amp @ +12V
|
With Power Distributor |
- +5V: 50 Amp
- +3.3V: 30 Amp
- -12V: 0.6 Amp
|
Certification |
80PLUS Platinum Certified [ Test Report ] |
|
|
CPU |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator
|
FAN |
- Total of eight fan headers supporting up to 8 fans
- Eight 4-pin fan headers
- 8x fans with tachometer status monitoring
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
|
Temperature |
- Monitoring for CPU and chassis environment
- Thermal Control for 8x fan connectors
- PECI
|
Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
|
RoHS |
|
Environmental Spec. |
- Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|