SNK-P1034P . SuperMicro . Ультратонкие Blade-сервера . Серверы HPE, IBM, Dell, Sun, SuperMicro, FSC, Intel
SNK-P1034P
Основные характеристики
Two
1. Intel® Xeon® processor 5600/5500
series, with QPI up to 6.4 GT/s
2. Intel® 5500 (Tylersburg) Chipset
3. Up to 128GB DDR3 1333/ 1066/ 800MHz
ECC Registered DIMM / 32GB
Unbuffered DIMM
4. Intel® 82576 Dual-Port Gigabit
Ethernet
5. 2 x 2.5" Hot-Plug SATA Drive Trays
6. Integrated Matrox G200eW Graphics
7. Integrated IPMI2.0 w/ remote KVM and
virtual media
8. Mellanox ConnectX QDR InfiniBand
40Gbps or 10GbE support (Optional)
|
SBI-7226T-T2 |
- Processor Blade SBI-7226T-T2 (Black)
|
|
CPU |
- Dual 1366-pin LGA Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Intel® Xeon® Processor X5600/E5600/L5600 Series
(Westmere) 40W - 95W
- Intel® Xeon® Processor X5500/E5500/L5500 Series
(Nehalem-EP) 38W - 95W
|
QPI |
|
|
Memory Capacity |
- 8x 240-pin DIMM sockets
- Supports up to 128 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
- Supports up to 32 GB 1333 / 1066 / 800MHz DDR3 ECC Unbuffered memory
- Memory Mirroring supported
|
Memory Type |
- 1333 / 1066 / 800MHz ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
DIMM Sizes |
- 1GB, 2GB, 4GB , 8GB , 16GB
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
On-Board Devices (per Node) |
Chipset |
- Intel® 5500 (Tylersburg) chipset
- ICH10R + IOH-24D
|
SATA |
- Intel ICH10R SATA 3.0Gbps Controller
- RAID 0, 1 support
|
InfiniBand Support |
|
IPMI |
- Support for Intelligent Platform Management Interface (IPMI) v.2.0 via Chassis Management Module (CMM)
|
Network Controllers |
- Intel® 82576 Dual-Port Gigabit Ethernet
- Intel® I/OAT 3 support for fast, scaleable, and reliable networking
- VMDq support for better performance of virtualization
|
Super I/O |
|
Clock Generator |
|
|
BIOS Type |
- 32Mb SPI Flash EEPROM with AMI® BIOS
|
BIOS Features |
- Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
Height |
|
Width |
|
Depth |
|
Weight |
|
Available Colors |
|
Buttons |
- Power On/Off button
- KVM button
|
LEDs |
- Power LED
- UID / KVM LED
- Network Activity LED
- Fault LED
|
Connector |
- SUV (Serial/USB/Video) & KVM Connector
|
Hot-swap |
- 2x 2.5" SATA Hot-swap drive bays
|
KVM |
- 1 Front Connector for Supermicro KVM Card
|
Environmental Spec. |
- Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
United States / Canada |
- FCC- Emissions (US) Verification
|
Europe |
- EN55022 - Emissions
- EN55024 - Immunity
- EN61000-3-2 - Harmonics
- EN61000-3-3 - Voltage Flicker
- CE - EMC Directive 89/336/EEC
|
United States / Canada |
- UL60950-1 - CSA/CUL 60950-1
|
Europe |
- EN60950-1, CE - Low Voltage Directive 73/23/EEE
|
|
|
|
|
|
Parts List - (Items Included) |
|
|
Part Number |
Qty |
Descriptin |
Motherboard / Chassis |
MBD-B8DTT-O-P CSE-720M-240B |
1 1 |
Super B8DTT Motherboard Black Front Blade Chassis (B = Black) |
Hard Drive Backplane |
BPN-SB-SATA |
1 |
SATA Hard Drive Backplane |
Hard Drive Tray |
MCP-220-00079-0B |
4 |
Black 2.5" SATA HDD Tray |
Front Panel Control |
MCP-280-KVMT |
2 |
Power & KVM buttons, LED, KVM connector |
|
|