 |
| AS-1041M-T2 |
- A+ Server 1041M-T2 (Beige)
|
| AS-1041M-T2B |
- A+ Server 1041M-T2B (Black)
|
| |
|
| CPU |
- Quad 1207-pin Socket F
- Supports up to four Six-Core AMD Opteron™ 8000 Series (Socket F) processors
- HT3.0 Link support
|
| Chipset |
- nVidia MCP55 Pro
- AMD 8132
|
| |
|
| Memory Capacity |
- Sixteen 240-pin DIMM sockets
- Supports up to 128 GB DDR2 800/667/533/400 MHz memory
- Single or Dual (recommended) channel memory support
- For Quad CPUs: Recommended that memory be populated equally in adjacent memory banks
|
| Memory Type |
- DDR2 800/667/533/400MHz Reg. ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 256MB, 512MB, 1GB, 2GB, 4GB, 8GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
|
| SATA |
- nVidia MCP55 Pro SATA2 3.0Gbps Controller
- 6 SATA2 Ports
- nVidia RAID 2.0
- SATA RAID 0, 1, 0+1, 5 JBOD Support
|
| IPMI |
- Intelligent Platform Management Interface 2.0, Low Profile (Opt: AOC-SIMSO R3.00)
- NOTE: KVM-over-LAN not supported - there is no DVO signal to the IPMI slot
- RMM (Remote Management Module)
- (Card not included)
- For Dedicated LAN, cable CBL-0177L must be used (cable sold separately)
|
| Network Controllers |
- Intel® 82546GB Dual Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
| Super I/O |
|
| VGA |
- ATI ES1000 Graphics Controller
|
| |
|
| SATA |
|
| IDE |
- Single EIDE channel support up to two UDMA IDE devices
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA 100/133
|
| Floppy |
- 1 Floppy port; 1.44 MB support
|
| LAN |
|
| USB |
- FUCI
- Up to 4 USB Ports 2.0 Compliant
- 2 Rear Ports
- 2 Internal Headers
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Ports |
- 1 Fast UART 16550 serial port
- 1 Header
|
| VGA |
|
| |
|
| BIOS Type |
- 8Mb Flash EEPROM with AMI® BIOS
- SST 49LF080A BIOS Chip
|
| BIOS Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3
|
|
 |
|
|
| Form Factor |
|
| Model |
|
| |
|
| Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
| |
|
| Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
|
| |
|
| PCI-Express |
|
| HyperTransport |
- 1 HyperTransport (HTX) Connectors
|
| |
|
| Hot-swap |
- 3 x 3.5" Hot-swap SATA drive bays
|
| |
|
| 1U SATA Backplane |
| |
|
| DVD-ROM |
- Slim 8x DVD, 24x CD, DVD-ROM drive
|
| |
|
| Fans |
- 6x heavy-duty counter-rotating fans with optimal fan speed control
|
| Shroud |
|
| |
|
| 1000W AC-DC high-efficiency power supply w/ PFC + PDB |
| AC Voltage |
- 100 - 240V, 50 - 60Hz, 15 - 7Amp
|
| +5V standby |
|
| +12V |
|
| +5V |
|
| +3.3V |
|
| -12V |
|
| |
|
| CPU |
- Monitors CPU Core Voltages, +3.3V, +5V, +12V, 5V Standby, VBAT
- CPU 4-Phase-switching voltage reulator
|
| FAN |
- Total up to 9-fan status tachometer monitoring
- Up to nine 3-pin fan headers
- Status monitor for speed control
- Support 3-pin fans with fan-speed control
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- PC Temperature Sensing Logic
|
| LED |
- CPU / System Overheat LED
- Suspend-State Indicator LED
- +5V Standby Alert LED
|
| Other Features |
- Chassis Intrusion Detection
- Chassis Intrusion Header
|
| |
| Environmental Specifications |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
Купить / Заказать / Узнать цену
