Купить / Заказать / Узнать цену
Emulex LP9002L-F2
- Simultaneous full duplex 2Gb/s Fibre Channel delivers up to 400MB/s
- Automatic speed negotiation
- Full fabric support using F_Port and FL_Port connections
- Onboard hardware context cache for superior fabric performance
- Support for concurrent multiple protocols (SCSI, IP)
- Full support for both FC service Class 2 and 3
- Support for FC-Tape (FCP-2) devices
- End-to-end parity protection for high data integrity
- Buffered data architecture to support up to 50km cabling at full 2Gb/s bandwidth
- Robust suite of software including IP and storage protocols under Windows Server 2003, Windows 2000, Windows NT, HP-UX, Linux, NetWare, Solaris and AIX
- Optical small form factor (LC) interface support either short-wave or long-wave optics
- 32/64 bit and 33/66 MHz PCI support
- Supports common HBA API Management Interface (FC-MI Annex A)
- Supports Fibre Channel fabric boot
Технические характеристики |
|
| General information | Product Line: Lightpulse |
| Product type | fibre channel host Bus Adapter |
| Technical information | Ports channels: 1, LC optical connector(s) Host Interface: PCI 66MHz 64-bitpci 33MHz 32-bit Fabric support: F_portfl_Port Topology: Point-To-pointarbitrated loopswitched fabric Supported fibre channel class: Class 2CLASS 3 |
| Media & performance | Connectivity Media: 50/125, M Multi-mode Fiber fibre CHANNEL62.5/125, M Multi-mode Fiber fibre channel Data transfer rate: 1.0625GBPS fibre CHANNEL2.125GBPS fibre channel Data throughput: 400 Mbps fibre channel full duplex Supported distance: 1640 Ft 50/125, M Multi-mode Fiber, @ 1 GBPS984 Ft 62.5/125, M Multi-mode Fiber, @ 1 GBPS984 Ft 50/125, M Multi-mode Fiber, @ 2 GBPS492 Ft 62.5/125, M Multi-mode Fiber, @ 2 GBPS |
| Management & Protocols | Protocols: FC-PH1FC-PH2FC-PH3FC-pifcp-scsifc-MJSFC-tape |
| Memory |
|
| Power description | Input Voltage: 3.3 V DC, 5% Power Consumption: 7.2 w TYPICAL9.3 w maximum |
| Environmental Conditions | Temperature: 0, C (32, F) to 45, C (113, F) operating-40, C (-40 F) to 70, C (158, F) Storage Humidity: 5% to 95% non-condensing relative Humidity |
| Physical characteristics | Form factor: Low-profile MD2 Dimensions: 6.60, x 2.54 |
| Miscellaneous | Additional information: Emulex centaur ASIC technology Up to 66MHz, PCI Bus master DMA 3.3 Or 5V signaling airflow required: 100 LF/M low profile Or Standard bracket automatic speed negotiation onboard Hardware context cache for Superior fabric performance support for concurrent multiple Protocols (SCSI, Ip) end-To-end parity protection for High data integrity Supports common hba API management Interface (FC-mi annex a) Supports fibre channel fabric boot Compatibility: Software: Windows server 2003 Windows 2000 Windows NT HP-UX Linux NetWare Solaris AIX Hardware: X86 SPARC PowerPC, PCI platforms Certifications & Standards: PCI: Local Bus specification version 2.2 agency approvals: Class 1 Laser Product per DHHS 21CFR (J) & EN60825 UL recognized to UL 1950 cur recognized to CSA22.2, No. 950, TUV certified to EN60950 FCC rules, Part 15, class a ices-003, class, a EMC directive 89/336/EEC (CE MARK) EN55022, class a EN55024 australian EMC framework (C-tick MARK) as/NZS 3548, class a VCCI class a |
| Warranty | Standard Warranty: 3 Year(s) |
| Form Factor | Internal Adapter |
| Interface Compatibility | PCI • PCI-X |
| Standard Data-Rate(s) | 1 Gbps |
| Max. Data Transfer Rate | 2000 Mbps |
| Duplex Mode | Full Duplex |
| Cabling Type | Fiber Optic |
| Networking Connectors | LC |
| Fiber Signaling Mode | MultiMode |
| Fiber Channel Standards | FC-AL • FC-PH |
| Operating System | HP-UX • IBM AIX • Linux • Microsoft Windows 2000 • Novell NetWare • SunSoft Solaris |
| Dimensions | Width 2.6 in. Depth 6.6 in. Height 2.52 in. |
| MPN | LP9002L-F2 |