Emulex LP 3000
The LightPulse® fibre channel PCI host bus adapters deliver exceptional performance through the use of Emulex Firelite ASIC, utilizing a built-in proprietary sequencing engine. The LP3000 supports full-duplex data transfers without overloading the host processor. The LP3000 delivers arbitrated loop connectivity and Class 3 frame format. Support for copper cabling is provided through an embedded DB9 interface.
Особенности
- full duplex fibre channel 1.0625 Gb/s transfers
- full support for both FC service Class 2 and 3
- copper DB9 interface
- single chip architecture
- proprietary sequencing engine
Технические характеристики |
|
Standards | ANSI fibre channel FC–PH ANSI fibre channel FC–AL PCI local bus revision 2.2 fibre channel Class 3 |
Architecture | single chip, Emulex Firelite ASIC up to 33 MHz PCI bus master DMA 128KB FLASH memory |
Software Environments | Windows NT 3.5.1/4.0 (x86) SCSI |
Hardware Environments | x86, PCI hardware platforms |
Copper | data rate ............... 1.0625 Gb/s cable type............. dual twinax or quad axial connector type .... DB9 distance................. 30 meters (98) |
Physical Dimensions | short PCI form factor 121.19 x 106.68mm (4.85" x 4.20") |
Power Requirements | volts ....................... +5 VDC power ................... 10 watts typical |
operating temperature | 0o to 45oC (32o to 113oF) |
Storage Temperature | -10o to 55oC (14o to 131oF) |
Relative Humidity | 5% to 95% non-condensing |
Agency Approvals | UL listed to UL 1950 CUR listed to CSA22.2, No. 950 TUV certified to EN60950 FCC rules, Part 15, Class B ICES-003, Class B EMC Directive 89/336/EED (CE Mark) EN55022, CISPR22/85, Class B EN50085-1 Australian EMC Framework (C-Tick Mark) AS/NZS 3548, Class B |