• Dual I/O - VTJ830sS |
• Up to twenty-four 3.5/2.5” HDDs or SSDs • SAS 6 Gb/s, 3Gb/s, SATA 6G/s, 3Gb/s • Supports any mix of SAS and SATA drives simultaneously in the same enclosure |
• Each SBB 2.0 I/O module has two SAS ports using industry standard Mini SAS 4x wide-port-SAS connectors (SFF- 8088), one IN and one OUT for cascading JBODs |
• ANSI T10 SAS 2.0 and 2.1 Compliant |
• Self-configuring expander supports full SAS domain topology management • SMP – SAS Management Protocol • In-band access to Expander and PHY information • Statistic counters and performance monitors • SES EM – SES Enclosure Management (ANSI T10 SES 2 compliant) • SCSI SES command set over virtual SSP device |
• LED status indicator support for drives • FRU and enclosure environmentals • In-band SES enclosure management alerts user to out of spec operation: thermal condition, voltage condition or component failures, protecting data and hardware • Full subsystem management CLI through out-of-band RS232 serial port |
• SES over in-band SAS |
• 100-240 Vac Auto-Ranging |
• 15 A @ 110 Vac; 6 A @ 240 Vac |
• Operational: 5° to 40°C • Non-Operational: -40° to 60°C |
• Operational: 10% to 90% (Non-Condensing) • Non-Operational: 5% to 95% (Non-Condensing) |
• 55 dB (Typical) • 65 dB (Maximum) |
• Operational: 5G, 11 mS duration • Non-Operational: 10G, 11mS duration |
• Operational: 0.3G, 5 to 500 Hz • Non-Operational: 1G, 5 to 500 Hz |
• CE, FCC Class A, UL/cUL, TUV, BSMI Class A, VCCI Class A, CB, KCC, NOM, GOST-R, IRAM, C-Tick, S-Mark |
• RoHS, GreenPC, WEEE |
• Dual 750W • Hot swap and redundant with PFC, N+1 design • 100-240 Vac auto-ranging, 50-60 Hz • 80PLUS Power Efficiency |
• 17.4 x 44.7 x 50.7 cm • 6.9 x 17.6 x 19.96 in |
• 26 kg / 57.3 lbs (w/o drives) |
• Three year complete system limited warranty with advanced parts replacement; optional extended warranty; optional onsite parts replacement program |
• 24/7 email and phone support (English only); 24/7 access to Promise support site-drivers, firmware and compatibility lists |