Купить / Заказать / Узнать цену
Sun Netra CP3010 Blade
Slide in a Netra CP3010 UltraSPARC ATCA Blade and get the power of a server on a blade. Dual energy-efficient UltraSPARC IIIi-class processors consume so little energy the design can include a 2.5-inch hard drive, two expansion slots, compact flash support, and double the number of memory slots found on competing Intel-based ATCA blades - all within the defined ATCA power budget. The Netra CP3010 is truly a server on a blade.
At a Glance
-
1-2 UltraSPARC IIIi-class processors
-
4 DIMM slots support up to 4 GB main memory
-
Support for 2 GB compact flash memory
-
2 PMC expansion slots
-
Run Solaris 9 or 10 OS
-
Common Rear Transition Module (RTM) connector simplifies cabling
-
Simplified management via PICMG 3.0
Key Specifications
-
Choice of single or dual UltraSPARC IIIi-class processors
-
Choice of Solaris 9 or 10 operating systems
-
4 DIMM slots support up to 4 GB main memory
-
Support for up to 2 GB compact flash
| Processor Options | Single or dual UltraSPARC IIIi-class processors |
| Speed | 1.1 GHz in 200-watt mode |
| Main memory | 4 DDR1 DIMMs support up to 4 GB 4x 1GB |
| Cache | 32 KB instruction cache, 64 KB data cache |
| Disk controller | LSI 1064 SAS/SATA controller chip |
| Operating system support | Solaris 9 and 10 OS |
| Ports | Four SAS ports for external storage access (two front panel connectors and two rear panel connectors) |
| System management | PICMG 3.0 Base specification |
| Network | Two 10/100/1000Base-T Ethernet interfaces, dual SERDES interface as extended fabric |
| I/O interfaces | Dual IPMI channel connects to the backplane for communicating with shelf management, front panel and RTM interface |
| PMC slot | Two PCI Telecom Mezzanine Card (PMC) expansion slots that support PCI I/O expansion and storage PMC modules |
| PCI | Two 33 MHz, 64-bit, 5 V tolerant ASICs as bridge from Jbus to PCI (PMC) supporting I/O expansion and storage modules |
| Serial ports | Two asynchronous serial ports RJ-45 |
| Front panel LED | Three LEDs, plus one hot-swap status LED |
| Single-slot ATCA (PICMG 3.0) | |
| Height | 8-U, 322.25mm |
| Depth | 280mm |
| Width | 30mm |
| Cooling | Available upon request |
| Power | 200 W output power, -48 V |
| Operating temperature | 5° C to 40° C (41° F to 104° F) five to 85 percent relative humidity, noncondensing short term. -5° C to 55° C (23° F to 131° F) five to 90 percent relative humidity, noncondensing, but not to exceed 0.024 kg water/kg dry air (0.053 lb. water/ 2.205 lb. dry air) |
| Nonoperating temperature | -40° C to 70° C (-40° F to 158° F), up to 93 percent relative humidity noncondensing, 38° C (100.4° F) max. wet bulb |
| Acoustic Noise | Declared noise emissions in accordance with ISO 9296: 7.0 B (operating and idling) |
| Seismic | Meets GR-63-CORE requirements for earthquake risk Zone 4 |
| Safety and ergonomics | cULus, TUV GS, CB scheme with all national differences CE, CCC, GOST R, S-MARK UL/CUL-UL 60950, CSA C22.2 No. 950 CB Scheme-IEC950 with all country deviations, TUV GS-EN60950 (CE) and EN29241 Ergonomics GOST R |
| Regulatory Compliance | Class A FCC, CE, VCCI, BSMI, C-Tick, MIC, CCC, GOST |
| Telecom Environment Certification | Telcordia SR 3580 NEBS Level 3 |
| Warranty | One year, return to Sun |