|
SYS-1025W-URB |
- SuperServer 1025W-URB (Black)
|
|
|
CPU |
- Dual 771-pin LGA Sockets
- Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below:
- Quad-Core Intel®
Xeon®Processor 5400/5300LV sequence (Harpertown /Clovertown processor) up to 3.20 GHz
- Dual-Core Intel®
Xeon®Processor 5200/5100LV sequence (Wolfdale/Woodcrest processor) up to 3.40 GHz
|
System Bus |
- 1600 / 1333 / 1066 MHz system bus
|
|
|
Memory Capacity |
- Eight 240-pin DIMM sockets
- Supports up to 64 GB 800* / 667 / 533MHz DDR2 ECC FB-DIMM memory
- Dual branch memory bus
- Memory must be populated in pairs
- Memory Sparing supported
|
Memory Type |
- 800* / 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
DIMM Sizes |
- 256MB, 512MB, 1GB, 2GB, 4GB, 8GB**
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
|
|
Chipset |
- Intel® 5400 (Seaburg) chipset
- MCH + ESB2
|
SATA |
- Intel ESB2 SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support (Windows only)
- RAID 0, 1, 10 support (Linux)
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0 / 1.5
- 200-pin IPMI slot (SIMSO(+))
- (Optional: AOC-SIMSO(+))
- For Dedicated LAN, cable CBL-0177L must be used (cable sold separately)
|
Network Controllers |
- Intel® 82575EB Dual-Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT support for fast, scaleable, and reliable networking
|
Graphics |
- ATI ES1000 controller with 32 MB of video memory
|
Super I/O |
|
Clock Generator |
|
|
|
Serial ATA |
- Six Serial ATA ports
- Six SATA hard drives supported
|
IDE |
- Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card
- Compact Flash (40-pin connector, IDE 1, single channel) slot
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
Floppy |
- 1 Floppy controller; 1.44 MB
|
LAN |
|
USB |
- 2x USB rear ports
- 3x USB internal headers
- Total 5 USB 2.0 Compliant / 1.1 Compliant
|
VGA |
|
Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
Serial Port / Header |
- 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header
|
|
|
|
|
Form Factor |
|
Model |
|
|
|
Height |
|
Width |
|
Depth |
|
Gross Weight |
|
Available Colors |
|
|
|
Buttons |
- Power On/Off button
- System Reset button
- UID button
|
LEDs |
- Power status LED
- HDD activity LED
- 2x Network activity LEDs
- Universal Information (UID) LED
|
|
|
Left Slot |
- 1 Unversal I/O (UIO) Slot AND
- 1 (x8) PCI-e (Gen 2.0) Slot
|
Right Slot |
- 1 (x8) PCI-e (Gen 2.0) Slot (Low profile size w/ 5.5" length)
|
|
|
Hot-swap |
- 8x Hot-swap 2.5" SAS / SATA HDD trays (w/ optional UIO SAS controller card)
|
|
|
1x 1U SAS / SATA backplane |
|
|
DVD-ROM |
|
|
|
Fans |
- 4x Cooling Fans
- 2x Optional cooling fans for add-on cards
|
Shroud |
|
|
|
650W (1 + 1) Redundant AC-DC power supply w/ PFC |
AC Voltage |
- 100 - 240V, 60-50Hz, 8-4 Amp
|
+5V standby |
|
+12V |
|
With Power Distributor |
- +5V: 25 Amp
- +3.3V: 25 Amp
- -12V: 0.6 Amp
|
|
|
BIOS Type |
- 8Mb Flash EEPROM with Phoenix® BIOS
|
BIOS Features |
- Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
|
|
|
BIOS Type |
- 16Mb Flash EEPROM with Phoenix® BIOS
|
BIOS Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
|
|
RoHS |
|
Environmental Spec. |
- Operating Temperature: 10° to 35°C (50° to 95°F)
- Non-operating Temperature: -40° to 70°C (-40° to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|