|
SYS-6015B-3V |
- SuperServer 6015B-3V (Silver)
|
SYS-6015B-3B |
- SuperServer 6015B-3B (Black)
|
|
|
CPU |
- Dual 771-pin LGA Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same
type below:
- Quad-Core Intel®
Xeon®Processor 5400/5300 sequence (Harpertown /Clovertown processor) up to 3.16 GHz
- Dual-Core Intel®
Xeon®Processor 5200/5100/5000 sequence (Wolfdale /Woodcrest/Dempsey processor) up to 3.40 GHz
|
System Bus |
- 1333 / 1066 / 667 MHz system bus
|
Operating System Software |
- Supports 64-bit Operating Systems
- Supports 32-bit Operating Systems
|
|
|
Memory Capacity |
- Eight 240-pin DIMM sockets
- Supports up to 32 GB 667 / 533MHz DDR2 ECC FB-DIMM memory
- Dual branch memory bus
- Memory must be populated in pairs
|
Memory Type |
- 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
DIMM Sizes |
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
|
|
Chipset |
- Intel® 5000P (Blackford) chipset
- MCH + PXH-V + ESB2
|
SAS |
- Adaptec AIC-9410 Serial-Attached SCSI (SAS) Controller
- Dual-Channel SAS (1 internal, 1 external)
- Each SAS channel supports up to 4 SAS / SATA drives for a total of up to 8 SAS or SATA hard drives
- Host RAID 0, 1, & 10 support
|
RAID |
- Support for Zero-Channel RAID with Supermicro All-In-One-ZCR Card: AOC-LPZCR2
- Optional: (Card not included)
- RAID 0, 1, 5, 10
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- 200-pin IPMI SO-DIMM socket (SIMSO)
- (Optional: AOC-SIMSO(+))
|
Network Controllers |
- Intel® (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT support for fast, scaleable, and reliable networking
|
Graphics |
- ATI ES1000 controller with 16 MB of video memory
|
Super I/O |
|
|
|
SAS |
- Eight SAS / SATA ports (4 internal, 4 external)
- Dual-Channel SAS controller
- Eight SAS / SATA hard drives supported
|
IDE |
- Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card
- Compact Flash (40-pin connector, IDE 1, single channel) slot
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
Floppy |
- 1 Floppy controller; 1.44 MB, 2.88 MB
|
LAN |
|
USB |
- 2x USB rear ports
- 3x USB internal headers
- Total 5 USB 2.0 Compliant / 1.1 Compliant
|
VGA |
|
Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
Serial Port / Header |
- 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header
|
|
|
|
|
Form Factor |
|
Model |
|
|
|
Height |
|
Width |
|
Depth |
|
Gross Weight |
|
Available Colors |
|
|
|
Buttons |
- Power On/Off button
- System Reset button
|
LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
|
|
|
Left Universal Slot |
- 1 64-bit 133MHz PCI-X OR
- 1 (x8) PCI-e Slot
- Supports Full-height, Full-length Add-on Cards
|
Right Universal Slot |
- 1 64-bit 100MHz PCI-X OR
- 1 (x8) PCI-e Slot
- Supports Low-profile Add-on Cards
|
|
|
Hot-swap |
- 4x 3.5" Hot-swap SAS drive bays
|
|
|
DVD-ROM |
- Slim 8x DVD, 24x CD, DVD-ROM drive
|
|
|
1U SAS Backplane w/ SES2 Enclosure Management |
|
|
Fans |
|
Shroud |
|
|
|
560W AC power supply w/ PFC (20-pin) |
AC Voltage |
- 100 - 240V, 50 - 60Hz, 8.5 - 4Amp
|
+5V |
|
+5V standby |
|
+12V |
|
-12V |
|
+3.3V |
|
|
|
BIOS Type |
- 8Mb Flash EEPROM with Phoenix® BIOS
|
BIOS Features |
- Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.1
- PCI 2.2
- ACPI 1.0
- USB Keyboard support
- Hardware BIOS Virus protection
|
|
Environmental Spec. |
- Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|