|
SYS-6015C-MTB |
- SuperServer 6015C-MTB (Black)
|
SYS-6015C-MT |
- SuperServer 6015C-MT (Beige)
|
|
|
CPU |
- Dual 771-pin LGA Sockets
- Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below:
- Quad-Core Intel®
Xeon®Processor 5400/5300 sequence (Harpertown /Clovertown processor) up to 3.16 GHz
- Dual-Core Intel®
Xeon®Processor 5200/5100 sequence (Wolfdale/Woodcrest processor) up to 3.40 GHz
|
System Bus |
- 1333 / 1066 MHz system bus
|
Operating System Software |
- Supports 64-bit Operating Systems
- Supports 32-bit Operating Systems
|
|
|
Memory Capacity |
- Six 240-pin DIMM sockets
- Supports up to 48GB 667/ 533MHz DDR2 ECC Register Single/Dual Rank memory *
- Dual channel memory bus
- Memory must be populated in pairs
|
Memory Type |
- 667/533MHz Register DDR2 ECC Single/Dual Rank SDRAM 72-bit, 240-pin gold-plated DIMMs *
|
DIMM Sizes |
- 256MB, 512MB, 1GB, 2GB, 4GB, 8GB**
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
|
|
Chipset |
- Intel® 5100 (San Clemente) chipset
- Intel® ICH9R
|
SATA |
- Intel ICH9R SB SATAII Controller
- RAID 0, 1, 5, 10 support (Windows only)
- RAID 0, 1, 10 support (Linux)
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0 / 1.5
- 200-pin IPMI slot (SIMLC)
- (Optional: AOC-SIMLC)
- NOTE: AOC-SIM1U+ - PCB 1.1A only KVM-over-LAN supported w/
|
Network Controllers |
- Intel® 82573V & 82573L Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
Graphics |
- XGI Z9 with 32 MB of video memory
|
Super I/O |
|
Clock Generator |
|
|
|
Serial ATA |
- Six Serial ATA ports
- Four SATA hard drives supported
|
IDE |
- Single EIDE channel supports up to two UDMA IDE devices(IDE-M, IDE-S) including CF card
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
- Compact Flash (40-pin connector, IDE 1, single channel) slot
|
Floppy |
- 1 Floppy controller; 1.44 MB, 2.88 MB
|
LAN |
|
USB |
- 2x USB rear ports
- 3x USB internal header
- 5 total USB ports, 2.0 Compliant / 1.1 Compliant
|
VGA |
|
Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
Serial Port / Header |
- 1 Fast UART 16550 serial port
- 1 Header
|
|
|
BIOS Type |
- 8Mb Flash EEPROM with Phoenix ® BIOS
|
BIOS Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0/2.0
- USB Keyboard support
- Hardware BIOS Virus protection
- SMBIOS 2.3
|
|
|
|
|
Form Factor |
|
Model |
|
|
|
Height |
|
Width |
|
Depth |
|
Gross Weight |
|
Available Colors |
|
|
|
Buttons |
- Power On/Off button
- System Reset button
|
LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
|
Ports |
- 2x Front USB Ports
- 1x Serial COM Port
|
Optional Front Bezel |
|
|
|
PCI-Express |
|
|
|
Hot-swap |
- 4x 3.5" Hot-swap SATA drive bays
|
|
|
DVD-ROM |
|
|
|
1x SAS / SATA Backplane |
|
|
Fans |
|
|
|
520W AC to DC power supply w/ PFC |
AC Voltage |
- 100 - 240V, 50 - 60Hz, 7 - 3Amp
|
+5V |
|
+5V standby |
|
+12V |
|
-12V |
|
+3.3V |
|
|
|
CPU |
- Monitors for CPU Cores,+1.8V, +3.3V, +5V, ±12V, +3.3V Stdby, +5 Stdby, VBAT, HT, Memory, Chipset
- CPU Core 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
FAN |
- Total of eight 4-pin fans
- 8x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support for 3-pins (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x Fan Connectors
- PSU I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
LED |
- CPU / System Overheat LED
- Suspend-state Indicator LED
|
Other Features |
- Chassis intrusion detection
- Chassis intrusion header
- Chipkill Support
|
|
RoHS |
|
Environmental Spec. |
- Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|