 |
| SYS-6025W-NTR+V |
- SuperServer 6025W-NTR+V (Silver)
|
| SYS-6025W-NTR+B |
- SuperServer 6025W-NTR+B (Black)
|
| |
|
| CPU |
- Dual 771-pin LGA Sockets
- Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below:
- Quad-Core Intel®
Xeon®Processor
5400/5300LV sequence (Harpertown
/Clovertown processor)
up to 3.20 GHz
- Dual-Core Intel®
Xeon®Processor
5200/5100LV sequence (Wolfdale/Woodcrest processor) up to 3.40 GHz
|
| System Bus |
- 1600 / 1333 / 1066 MHz system bus
|
| |
|
| Memory Capacity |
- Sixteen 240-pin DIMM sockets
- Supports up to 128 GB 800 / 667 / 533MHz DDR2 ECC FB-DIMM memory
- Dual branch memory bus
- Memory must be populated in pairs
- Memory Sparing supported
|
| Memory Type |
- 800 / 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 512 MB, 1GB, 2GB, 4GB , 8GB**
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
| |
|
| Chipset |
- Intel® 5400 (Seaburg) chipset
- ESB2
|
| SATA |
- Intel ESB2 SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support (Windows)
- RAID 0, 1, 10 support (Linux)
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0 / 1.5
- 200-pin IPMI slot (SIMSO(+))
- (Optional: AOC-SIMSO(+))
- For Dedicated LAN, cable CBL-0177L must be used (cable sold separately)
|
| Network Controllers |
- Intel® 82575 Dual-Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT support for fast, scaleable, and reliable networking
|
| Graphics |
- ATI ES1000 controller with 32 MB of video memory
|
| Super I/O |
|
| |
|
| PCI-Express |
- 3 (x8) PCI-e slots (2 w/ Gen 2.0)
- 1 (x4) PCI-e slot
|
| PCI-X |
- 2x 64-bit 133MHz PCI-X (3.3V) slots
|
| UIO |
|
| |
|
| Serial ATA |
- Six Serial ATA ports
- Six SATA hard drives supported
|
| IDE |
- Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card
- Compact Flash (40-pin connector, IDE 1, single channel) slot
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| Floppy |
- 1 Floppy controller; 1.44 MB
|
| LAN |
|
| USB |
- 2x USB rear ports
- 3x USB internal headers
- Total 5 USB 2.0 Compliant / 1.1 Compliant
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Port / Header |
- 1 Fast UART 16550 serial port
- 1 Serial header
|
| |
|
| BIOS Type |
- 8Mb Flash EEPROM with Phoenix® BIOS
- EFI BIOS Support
|
| BIOS Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
|
 |
|
|
| Form Factor |
|
| Model |
|
| |
|
| Height |
3.5" (89mm) |
| Width |
17.2" (437mm) |
| Depth |
25.5" (648mm) |
| Gross Weight |
55 lbs (24.9kg) |
| Available Colors |
Silver, Black |
| |
|
| Buttons |
• Power On/Off button
• System Reset button |
| LEDs |
• Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat / Fan Fail LED
• Power fail LED |
| Ports |
2x USB Ports + DB9 COM Port (optional) |
| |
|
| Hot-swap |
- 8x 3.5"SATA Hot-swap drive trays
- Supports up to 6x SATA hard drives
|
| |
|
| DVD-ROM |
Slim 8x DVD, 24x CD, DVD-ROM Drive |
| Floppy |
Slim 1.44MB Floppy Drive (Optional) |
| |
|
| 1x 2U SAS / SATA backplane |
| |
|
| Fans |
|
| Shroud |
|
| |
|
| 700W (1 + 1) Redundant AC-DC high-efficiency power supply w/ PFC |
| AC Voltage |
- 100 - 240V, 60-50Hz, 10 - 4 Amp
|
| +5V standby |
|
| +12V |
|
| +5V |
|
| +3.3V |
|
| -12V |
|
| |
|
| CPU |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
- 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
| FAN |
- Total of eight fan headers supporting up to 8 fans
- Four 4-pin fan headers
- Four 3-pin fan headers
- 8x fans with tachometer status monitoring
- Status monitor for speed control
- Support 3-pin fans
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x fan connectors
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- CPU / System Overheat LED
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
|
| |
RoHS
|
|
| Environmental Spec. |
- Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|
Купить / Заказать / Узнать цену
