 |
| AS-1021TM-INF+B |
- A+ Server 1021TM-INF+B (Black)
|
| |
|
| CPU |
- Support two Six-Core AMD Opteron™
2000 Series (Socket F) processors
NOTE: Support processors with
Max ACP ≤ 75W
|
| Chipset |
- nVIDIA MCP55V-Pro chipset with
up to 2.4GHz Hyper Transport Link support
|
| |
|
| Memory Capacity |
- Sixteen 240-pin DIMM sockets
- Up to 128GB of Reg. ECC DDR2 memory *
|
| Memory Type |
- Reg. ECC DDR2 800/667/533/400 MHz
- SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 256 MB, 512 MB, 1GB, 2GB, 4GB, 8GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors, detects
double-bit errors (using ECC)
- Supports Chipkill technology
|
| |
|
| SATA |
- nVIDIA MCP55V-Pro controllers
RAID 0, 1 support
|
| Network Controllers |
- nVIDIA MCP55V-Pro Dual-port Ethernet
controllers
|
| VGA |
- XGI Z9S 32MB PCI Graphics Controller
|
| Infiniband |
- Mellunox MT25204 20Gbps controller
Single port
|
| |
|
| PCI-Express |
- PCI-E x16 (low-profile) slot
|
| |
|
| SATA |
|
| LAN |
|
| Infiniband |
- 1x External Infiniband port
|
| USB |
Total of 6 USB 2.0 Compliant ports
• 2x USB rear ports
• 2x USB internal headers
• 2x USB internal ports (Type A) |
| VGA |
|
| Serial Ports |
|
| |
|
| Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
| |
|
| Buttons |
- Two sets of independent Power switch
and reset button
|
| LEDs |
- Power status LED
- Hard drive activity LED
- Two Network activity LEDs
- System Overheat LED
|
|
 |
|
|
| Form Factor |
|
| Model |
|
| |
|
| Hot-swap |
- Two sets (4 total) of 2x 3.5" hot-swap
SATA Drive Bays
|
| |
|
| Fans |
- Six heavy duty counter-rotating fans with
optimal fan speed control and air shroud
|
| |
|
| 980W AC-DC power supply w/ PFC |
| AC Input |
- 100 - 240V, 60-50Hz, 14-6 Amp
|
| +5V sb |
|
| +12V |
|
| |
|
| BIOS Type |
- 8Mb Flash EEPROM with AMI® BIOS
- SST-49LF080A BIOS Chip
|
| BIOS Features |
- Plug and Play (PnP)
- ACPI 1.0 / 2.0
- PCI 2.2
- DMI 2.3
- BIOS Rescue Hot Keys
- SMBIOS 2.3
- USB Keyboard support
|
| |
|
| Software |
- Optional IPMI (Intelligent Platform Management Interface) 2.0
- Super
 Doctor III
- Watch Dog
- NMI
|
| Power Configurations |
- ACPI Power Management
- Wake-On-LAN (WOL) header
- CPU Fan auto-off in sleep mode
- Power-on mode control for AC power loss recovery
|
| |
|
| CPU |
- Monitors CPU Core Voltages, +3.3V, +5V, ±12V, +5V Standby, HyperTransport Link voltage, memory voltage, VBAT, Chipset voltage
- CPU switching voltage regulator
|
| FAN |
- 6x fans w/ tachometer status monitoring
- Status monitor for speed on / off control
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- Thermal Control for 6x Fan Status
- I2C Temperature Sensing Logic
|
| LED |
- CPU / System Overheat LED
|
| |
|
RoHS
|
|
| Environmental Specifications |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
Купить / Заказать / Узнать цену
Doctor III
