SuperMicro SuperServer 5015M-T

Key Features

1. Intel® Pentium® D, Pentium® 4
Extreme Edition, Pentium 4, Pentium
Extreme Edition & Celeron D
in LGA775 Package(FSB 1066/800/533)
2. Up to 8GB unbuffered,
ECC DDRII 667/533 SDRAM
3. • 1 (x8) PCI-Express OR
    • 1x 64-bit 133MHz PCI-X Slot
4. 2x Intel® 82573V (Tekoa) PCI-e Gigabit
LAN Ports
5. ATI RageXL Graphics
6. 2x 1" Hot-swap SATA Drive Bays
7. 300W Power Supply

Specifications

Motherboard Super PDSMi   Processor/Cache CPU Single LGA775 ZIF Socket Supports an Intel® Pentium® D (Smithfield Dual Core) processor Supports an Intel® Pentium® Extreme Edition processor Supports an Intel® Pentium® 4 processor Supports an Intel® Pentium® 4 Extreme Edition processor Supports an Intel® Celeron® D processor Hyper-Threading (HT) capable 2MB / 1MB L2 Cache System Bus 1066 / 800 / 533 MHz system bus   System Memory Memory Capacity Four 240-pin DIMM sockets Supports up to 8 GB of unbuffered, ECC DDRII 667/533MHz memory (Dual Channel) Memory Type DDRII 667/533MHz unbuffered, ECC SDRAM, 240-pin gold-plated DIMMs DIMM Sizes 256 MB, 512 MB, 1 GB, 2GB Memory Voltage 1.8 V only   On-Board Devices Chipset Intel E7230 (Mukilteo) Smithfield chipset ICH7R + PXH-V + Intel® 82573V Serial ATA Intel® ICH7R SATA controller built-in RAID 0, 1, 5, 10 IPMI 1U support for Intelligent Platform Management Interface v.2.0 (Optional: AOC-IPMI20-E ) Network Controllers Dual-port Intel® 82573V Gigabit PCI-Express Ethernet (Tekoa) Supports 10Base-T, 100Base-TX, 1000BASE-TX, RJ45 output VGA On-board ATI RageXL graphics, 8MB Super I/O Winbond 83627EHF chip Clock Generator CK410   Expansion Slots PCI-Express / PCI-X 1x Universal (SXB-E) Slot for Riser (x1)  [ 1x 64-bit PCI-X 133MHz Slot ] OR  [ 1 (x8) PCI-Express Slot ] (Optional)   Input / Output Serial ATA Four Serial ATA ports (3 Gbps performance) Four SATA hard drives supported IDE One EIDE channel supports up to two UDMA IDE devices IDE Master / Slave 2 ports Supports UDMA Mode 5, PIO Mode 4, and ATA/100 White Connector for Compact Flash (CF) card only Floppy 1 Floppy controller; 1.44 MB LAN 2x RJ45 LAN port USB 4x internal USB headers 2x rear ports VGA 1x VGA Port Keyboard / Mouse PS/2 keyboard and mouse ports Serial Ports 1x Fast UART 16550 serial port 1x Header Parallel Port 1x ECP / EEP Parallel Header

Chassis Form Factor 1U Rackmount Model SC811T-300   Dimensions Height 1.7" (43mm) Width 16.8" (426mm) Depth 22.6" (574mm) Gross Weight 35 lbs (15.9kg) Available Colors Beige, Black   Front Panel Buttons Power On/Off button System Reset button LEDs Power LED Hard drive activity LED 2x Network activity LEDs System Overheat / Fan Fail LED Ports none   Drive Bays Hot-swap 2x 1" SATA Hot-swap drive bays   System Cooling Fans 3x 3-pin Counter-rotatign Cooling Fans   Power Supply Fixed 300W AC power supply module with PFC [ 24-pin, (4-pin=12V), 4-pin HDD ] AC Voltage 100 - 240V, 60-50Hz, 5 Amp DC Output 5V + 3.3V ? 100W +5V 25 Amp +5V standby 2.0 Amp +12V 24.0 Amp (Max) -12V 1.0 Amp +3.3V 15.0 Amp   PC Health Monitoring CPU Monitors for CPU Cores (+1.8V, +3.3V, +5, ±12V, +3.3V/+5V Standby, VBAT) CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V Adjustable CPU clock frequency ratio FAN Fan Speed Control Fans with tachometer monitoring Status monitor with firmware speed control Low noise fan speed control Status monitor for on/off control Support 3-pin fans (without speed control) Pulse Width Modulated (PWM) fan connector Temperature Monitoring for CPU and chassis environment CPU thermal trip support LED +5V Standby Alert LED Suspend-state indicator LED Other Features Chassis Intrusion Header   System BIOS BIOS Type 8Mb Flash EEPROM with Phoenix BIOS® BIOS Features Plug and Play (PnP) DMI 2.3 support PCI 2.2 ACPI 1.0 USB Keyboard support