Specifications
|
|
CPU |
- Dual mPGA700 ZIF Sockets
- Supports up to two Intel® Itanium® processor(s) with 9MB Integrated Advanced Transfer Cache up to 1.60GHz
|
System Bus |
|
|
|
Memory Capacity |
- Eight 184-pin DIMM sockets
- Supports up to 16 GB DDR200 memory
- 4-Way Interleaved Memory
- 4x Memory Modules must be populated at the same time
|
Memory Type |
- DDR200 registered ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
|
DIMM Sizes |
|
Memory Voltage |
|
|
|
Chipset |
- Intel® E8870 chipset
- SNC + SIOH + MRH_D + SPS + ICH4 + P64H2
|
IPMI |
- Support for Intelligent Platform Management Interface v.1.5 (Optional)
|
Network Controllers |
- 1x Intel® 82546EB Gigabit Ethernet
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
Graphics |
- ATI Rage XL SVGA PCI video controller with 8 MB of video memory
|
|
|
1x full-height, full-length 64-bit 133/100MHz PCI-X expansion slot (with Riser Card) |
|
|
PCI Expansion |
- 1x 64-bit 133/100/66MHz PCI-X (3.3V) slot
|
IDE |
- Dual EIDE channels support up to four UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
USB |
|
Serial Ports |
- 1x External Serial Port
- Internal header supporting 2x Fast UART 16550 serial ports
|
|
|
BIOS Type |
- 6MB AMI® Flash BIOS (total of 6x BIOS Chips)
|
BIOS Features |
- Plug and Play (PnP)
- SMBIOS 2.3
- PCI 2.2
- ACPI 1.0 (limited)
- Hardware BIOS virus protection
|
|
|
Height |
|
Width |
|
Depth |
|
Gross Weight |
|
Available Colors |
|
|
|
Buttons |
- Power On/Off button
- System Reset button
|
LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
|
Ports |
|
|
|
Internal Bays |
- 4x 1" Internal drive bays
|
|
|
Fans |
- 2x 10cm blower fans
- 1x 4cm x 2.8cm 12,500 RPM fan
|
|
|
Cold-swappable 500W AC power supply module w/ PFC [ 24-pin, (4-pin=12V)x2 ] |
AC Voltage |
- 100 - 240V, 60-50Hz, 10-5 Amp
|
DC Output |
- 5V + 3.3V ? 160W
- 12V + 5V + 3.3V ? 330W
|
+5V |
|
+5V standby |
|
+12V |
|
-12V |
|
+3.3V |
|
|
|
CPU |
- Monitors for CPU Cores, +1.8V, +3.3V, +5, ±12V, 3.3V Standby
- CPU Core 3-Phase-switching voltage regulator w/ auto-sense from 1.1V-1.5V
- Auto-switching for VRMs
|
FAN |
- Total of eight 3-pin fan headers
- 8x fans with tachometer monitoring
- Overheat backup fan connector
- Status monitor with firmware/software on/off control
|
Temperature |
- Monitoring for CPU, chassis, environment
- CPU thermal trip support
- Thermal control for 8x fan connectors
- I2C temperature sensing logic
|
LED |
- CPU Overheat LED
- System Overheat LED
- Suspend-state indicator LED
|
Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
|