|
SYS-5015B-MRB |
- SuperServer 5015B-MRB (Black)
|
|
|
CPU |
- Single LGA775 ZIF Socket
- Supports Quad-Core Intel® Xeon® X3300/X3200 series
- Supports Dual-Core Intel® Xeon® E3100/3000 series
- Supports Intel® Xeon® processor L3360 and L3110 series
- Supports Intel® Core™2 Quad Q9000/Q8000/Q6000 series
- Supports Intel® Core™2 Duo E8000/E7000/E6000/E4000 series
- Supports Intel® Pentium® E5000/E2000 series
- Supports Intel® Celeron® E1000 and 400 series
- NOTE: Intel Xeon processor L3014 requires an LGA771 socket and is not supported.
|
System Bus |
- 1333 / 1066 / 800 MHz system bus
|
|
|
Memory Capacity |
- Four 240-pin DIMM sockets
- Supports up to 8 GB of memory (Dual Channel)
|
Memory Type |
- DDR2 800/667 MHz unbuffered, ECC SDRAM, 240-pin gold-plated DIMMs
|
DIMM Sizes |
- 256 MB, 512 MB, 1 GB, 2GB, 4GB
|
Memory Voltage |
|
|
|
Chipset |
- Intel 3210 chipset
- ICH9R + PXH + Intel® 82573V + Intel® 82573L
|
Serial ATA |
- Intel® ICH9R SATA2 (3 Gbps) controller built-in
- RAID 0, 1, 5, 10 support (Windows Only)
- RAID 0, 1, 10 support (Linux)
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN & optional KVM-over-LAN support
- SIMSO Slot - Supermicro Intelligement Management
- (Optional: AOC-SIMSO-HTC, AOC-SIMSO+)
- NOTE: AOC-SIMSO+ must use Dedicated LAN for KVM-over-LAN function
|
Network Controllers |
- 2x Single-port Gigabit PCI-Express Ethernet Controllers
- Intel® 82573V + Intel® 82573L
- Supports 10BASE-T, 100BASE-T, 1000BASE-T, RJ45 output
|
VGA |
- On-board ATI ES1000 (32MB) graphics
|
Super I/O |
|
Clock Generator |
|
|
|
PCI-Express/ PCI-X |
- 1 Universal (x8) PCI-E or 1 64 bit PCI-X 133 MHz slot
|
|
|
Serial ATA |
- Six Serial ATA ports (3 Gbps performance)
- Six SATA hard drives supported
- External SATA supported
|
IDE |
- One EIDE channel supports up to two UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
Floppy |
- 1 Floppy controller; 1.44 MB
|
LAN |
|
USB |
- Up to 8x USB 2.0 / 1.1 compliant ports
- 2 rear ports
- 4 internal headers + 2 on-board
|
VGA |
|
Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
Serial Ports |
- 1x Fast UART 16550 serial port
- 1x internal header
|
Parallel Port |
- 1x ECP / EEP Parallel Port
|
|
|
BIOS Type |
- 16Mb Flash EEPROM with Phoenix BIOS®
|
BIOS Features |
- Plug and Play (PnP)
- DMI 2.3 support
- PCI 2.2
- ACPI 1.0/2.0
- SMBIOS 2.3
- USB Keyboard support
|
|
|
|
|
Form Factor |
|
Model |
|
|
|
Height |
|
Width |
|
Depth |
|
Gross Weight |
|
Available Colors |
|
|
|
Buttons |
- Power On/Off button
- System Reset button
|
LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
|
Ports |
|
|
|
Internal Bay |
- 1x 3.5" internal SATA drive bay
|
|
|
Fans |
|
|
|
200W Low Noise High-Efficiency (85%) AC-DC power supply with PFC |
AC Voltage |
- 100 - 240V, 50-60Hz, 4-2 Amp Max
|
+5V |
|
+5V standby |
|
+12V |
|
-12V |
|
+3.3V |
|
Certification |
80 PLUS Certified |
|
|
CPU |
- Monitors for CPU Cores ( +1.8V, +3.3V, +5, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset)
- CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.3750V-1.6000V
- Adjustable CPU clock frequency ratio
|
FAN |
- Total of six 4-pin fan headers
- 6x fans with tachometer monitoring
- Status monitor with firmware / software speed control
- Status monitor for on/off control
- Support 3-pin fans (without speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connector
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip support
- Thermal Monitor (TM2) Support
- PECI
|
LED |
- CPU / System Overheat LED
- +5 Standby alert LED
|
Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
|
|
RoHS
|
|
Environmental Spec. |
- Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|