 |
| SYS-5015B-NTB |
- SuperServer 5015B-NTB (Black)
|
| |
|
| CPU |
- Single LGA775 ZIF Socket
- Supports Quad-Core Intel® Xeon® X3300/X3200 series
- Supports Dual-Core Intel® Xeon® E3100/3000 series
- Supports Intel® Xeon® processor L3360 and L3110 series
- Supports Intel® Core™2 Quad Q9000/Q8000/Q6000 series
- Supports Intel® Core™2 Duo E8000/E7000/E6000/E4000 series
- Supports Intel® Pentium® E5000/E2000 series
- Supports Intel® Celeron® E1000 and 400 series
- NOTE: 1600MHz CPU has to use 1600 MHz XMP Memory
|
| System Bus |
- 1600 / 1333 / 1066 / 800 MHz system bus
|
| |
|
| Memory Capacity |
- Four 240-pin DIMM sockets
- Supports up to 8 GB of unbuffered, non-ECC DDR3 1333/1066/800MHz memory (Dual Channel) or up to 4 GB Non-ECC 1600MHz XMP DDR3 memory
|
| Memory Type |
- DDR3 1333/1066/800MHz unbuffered, non-ECC SDRAM, 240-pin gold-plated DIMMs or Non-ECC 1600MHz XMP DDR3 memory
|
| DIMM Sizes |
- 256 MB, 512 MB, 1 GB, 2 GB
|
| Memory Voltage |
|
| |
|
| Chipset |
- Intel X48 chipset
- ICH9R + Intel® 82573V + Intel® 82573L
|
| Serial ATA |
- Intel® ICH9R SB SATA controller built-in (3 Gbps)
- RAID 0, 1, 5, 10 (Windows Only)
- RAID 0, 1, 10 support(Linux)
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN & optional KVM-over-LAN support
- SIMSO Slot - Supermicro Intelligement Management
- (Optional: AOC-SIMSO-HTC, AOC-SIMSO+)
- NOTE: AOC-SIMSO+ must use Dedicated LAN for KVM-over-LAN function
|
| Network Controllers |
- 2x Single-port Gigabit PCI-Express Ethernet Controllers
- Intel® 82573V + Intel® 82573L
- Supports 10BASE-T, 100BASE-T, 1000BASE-T, RJ45 output
|
| VGA |
- On-board ATI ES1000 (32MB) graphics
|
| Super I/O |
|
| Clock Generator |
|
| |
|
| Serial ATA |
- Six Serial ATA ports (3 Gbps performance)
- Six SATA hard drives supported
- External SATA supported
|
| IDE |
- One EIDE channel supports up to two UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| Floppy |
- 1 Floppy controller; 1.44 MB
|
| LAN |
|
| USB |
- Up to 8x USB 2.0 / 1.1 compliant ports
- 2 rear ports + 2 Type A connectors + 2 internal headers (4 ports)
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Ports |
- 2x Fast UART 16550 serial port
- 1x internal header
|
| |
|
| BIOS Type |
- 16Mb Flash EEPROM with SPI BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- DMI 2.3 support
- PCI 2.2
- ACPI 1.0 / 2.0 (S3 Optional)
- USB Keyboard support
- SMBIOS 2.3
- RTC (Real Time Clock) Wakeup
|
|
 |
|
|
| Form Factor |
|
| Model |
|
| |
|
| Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
| |
|
| Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- UID LED
|
| Ports |
- 2x USB & DB9 COM port tray
- (Optional - in place of floppy drive)
|
| |
|
| Hot-swap |
- 4x 3.5" Hot-swap drive bays
|
| |
|
| Fans |
|
| |
|
560W AC power supply w/ PFC
(20-pin) |
| AC Voltage |
- 100 - 240V, 50 - 60Hz, 8.5 - 4Amp
|
| +5V |
|
| +5V standby |
|
| +12V |
|
| -12V |
|
| +3.3V |
|
| |
|
| CPU |
- Monitors for CPU Cores ( +1.8V, +3.3V, +5, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset)
- CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.3750V-1.6000V
|
| FAN |
- Total of six 4-pin fan headers
- 6x fans with tachometer monitoring
- Status monitor with firmware / software speed control
- Support 3-pin fans (without speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connector
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip support
- PSU I2C temperature sensing logic
- Thermal Monitor (TM2) Support
- PECI
|
| LED |
- CPU / System Overheat LED
- Suspend-state indicator LED
- +5 Standby power alert LED
- UID / Remote UID
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
| |
|
RoHS
|
|
| Environmental Spec. |
- Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|
Купить / Заказать / Узнать цену
