|
SYS-5015A-PHF |
- SuperServer 5015A-PHF(Black)
|
|
|
CPU |
- Intel® Atom™ D510 processor
|
System Bus |
|
|
|
Memory Capacity |
- Two 200-pin SO-DIMM sockets
- Supports up to 4 GB of unbuffered, non-ECC DDR2 667MHz SO-DIMM (Single Channel)
|
Memory Type |
- DDR2 667MHz unbuffered, non-ECC SO-DIMM
|
DIMM Sizes |
- 256 MB, 512 MB, 1 GB, 2GB
|
Memory Voltage |
|
|
|
Chipset |
|
SATA |
- Intel ICH9R SATA 3.0Gbps Controller
- RAID 0, 1 support
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Winbond® WPCM450 BMC
|
Network Controllers |
- 2x Intel 82574L Gigabit Ethernet
- Supports 10BASE-T, 100/1000BASE-TX, RJ45 output
|
Graphics |
- Onboard Matrox G200eW video
|
Super I/O |
|
|
|
Serial ATA |
- 6 Serial ATA ports ( 3Gbps )
|
LAN |
|
USB |
- 8x USB 2.0 / 1.1 compatible
- 2 rear + 3 headers (5 ports) + 1 Type A connector
|
VGA |
|
Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
Serial Ports |
- 1x Fast UART 16550 serial port
- 1x Serial Header
|
|
|
BIOS Type |
- 8Mb Flash EEPROM with AMI BIOS
|
BIOS Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0 / 3.0
- USB Keyboard support
- SMBIOS 2.3
|
|
|
Internal Bay |
- 1x 3.5" Internal Drive Bay (Standard)
- OR 2x 2.5" Internal Drive (Optional)
- OR 1x 2.5" Internal Drive (Optional)
|
|
|
|
|
Form Factor |
|
Model |
|
|
|
Height |
|
Width |
|
Depth |
|
Gross Weight |
|
Available Colors |
|
|
|
Buttons |
- Power On/Off button
- System Reset button
|
LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
|
I/O Ports |
- Standard System I/O
(Mouse, Keyboard, 2x USB Video, COM, LPT, LAN)
|
|
|
200W Low Noise AC-DC power supply with PFC |
AC Voltage |
- 100 - 240V, 50-60Hz, 3-1.5 Amp Max
|
+5V |
|
+5V standby |
|
+12V |
|
-12V |
|
+3.3V |
|
|
|
CPU |
- Monitors for CPU Cores, +3.3V, +5V, +12V, +3.3V Standby, VBAT, Memory, Chipset
- CPU Core 1-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
|
FAN |
- Total of four 4-pin fan headers
- 4 x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on / off control
- Support 3-pin fans (without speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan conn.
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 4 x Fan Connectors
- I2C temperature sensing logic
- Thermal Monitor 2 (TM2) Support
|
LED |
- CPU / System Overheat LED
|
Other Features |
- Chassis intrusion Detection
- Chassis intrusion Header
- SDDC Support
|
|
|
RoHS
|
|
Environmental Spec. |
- Operating Temperature: 0°to 50°C
- Non-operating Temperature: -40°to 70°C
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|