|
SYS-7045A-T |
- SuperServer 7045A-T (Beige)
|
SYS-7045A-TB |
- SuperServer 7045A-TB (Black)
|
|
|
CPU |
- Dual 771-pin LGA Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Quad-Core Intel®
Xeon®Processor 5300 sequence (Clovertown processor) up to 3.0 GHz
- Dual-Core Intel®
Xeon®Processor 5100/5000 sequence (Woodcrest/Dempsey processor) up to 3.73 GHz
- NOTE: Motherboard PCB revision 2.0 or above is required to support Xeon® 5100 (Woodcrest) processors
|
System Bus |
- 1333 MHz, 1066 & 667 MHz system bus
|
Operating System Software |
- Supports 64-bit Operating Systems
- Supports 32-bit Operating Systems
|
|
|
Memory Capacity |
- Eight 240-pin DIMM sockets
- Supports up to 32 GB 667/533MHz DDR2 FB-DIMM memory
- Dual branch memory bus
- Memory must be populated in pairs
|
Memory Type |
- 667/533MHz FB-DIMM (Fully Buffered DIMM) DDR2 ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
|
DIMM Sizes |
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
|
|
Chipset |
- Intel® 5000X (GreenCreek) chipset
- MCH + PXH-V + ESB2
|
SATA |
- ESB2 SATAII Controller
- RAID 0, 1, 5, 10 support
|
IPMI |
|
Network Controllers |
- Intel® (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT support for fast, scaleable, and reliable networking
|
Super I/O |
|
Clock Generator |
|
|
|
PCI-Express |
- 1 (x16) PCI-e slot
- 1 (x4) PCI-e (using x16) slot
|
PCI-X |
- 2x 64-bit 133/100MHz PCI-X (3.3V) slots
- 1x 64-bit 100MHz PCI-X (3.3V) slot
|
PCI |
- 1x 32-bit 33MHz PCI (5V) slot
|
|
|
Serial ATA |
- Six Serial ATA ports
- Six SATA hard drives supported
|
IDE |
- Single EIDE channel supports up to two UDMA IDE devices(IDE-M, IDE-S) including CF card
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
- Compact Flash (40-pin connector, IDE 1, single channel) slot
|
Floppy |
- 1 Floppy controller; 1.44 MB, 2.88 MB
|
LAN |
|
USB |
- 4x USB rear ports
- 1x USB internal header
- 6 total USB ports, 2.0 Compliant / 1.1 Compliant
|
Audio |
|
Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
Serial Port / Header |
- 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header
|
Parallel Port |
- 1 ECP / EEP parallel port
|
|
|
|
|
Form Factor |
- 4U Rackmountable / Tower
- Optional Rackmount Kit (CSE-PT26)
|
Model |
|
|
|
Height |
|
Width |
|
Depth |
|
Gross Weight |
|
Available Colors |
|
|
|
Buttons |
- Power On/Off button
- System Reset button
|
LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Fail LED
|
Ports |
|
|
|
Hot-swap |
|
Peripheral Bay(s) [90o Rotatable] |
- 2x 5.25" Peripheral Drive Bay
- 1x 5.25" Bay For Floppy Drive
|
|
|
Floppy |
- Panasonic 3.5" 1.44MB Floppy Drive
|
|
|
SC743 SATA Backplane w/ Enclosure Management |
|
|
Fans |
- 4x 5000 RPM Hot-swappable PWM Cooling Fans
- 1x 4000 RPM Hot-Swappable Rear Exhaust PWM Fan
- 1x Air Shroud
|
|
|
645W Low-Noise AC power supply with PFC [ 24-pin, (4-pin, 8-pin) = 12V ] |
AC Voltage |
- 100 - 240V, 50 - 60Hz, 11 - 5Amp
|
DC Output |
|
+5V |
|
+5V standby |
|
+12V |
|
-12V |
|
+3.3V |
|
|
|
CPU |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, -12V & +3.3V Standby
- CPU Core 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
FAN |
- Total of eight 4-pin fans
- 8x fans with status monitoring
- Status monitor for speed control
- Support 3-pin fans
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature |
- Monitoring for CPU and chassis, environment
- CPU thermal trip support
- PSU I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
|
LED |
- CPU / System Overheat LED
|
Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
|
|
Environmental Spec. |
- Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|
|
BIOS Type |
- 8Mb Flash EEPROM with Phoenix® BIOS
|
BIOS Features |
- Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.1
- PCI 2.2
- ACPI 1.0
- PCI-X 1.0
- USB Keyboard support
- Hardware BIOS Virus protection
|
|