|
SYS-8044T-8R |
- SuperServer 8044T-8R (Beige)
|
SYS-8044T-8RB |
- SuperServer 8044T-8RB (Black)
|
|
|
CPU |
- Quad 604-pin FC-mPGA4 Sockets
- Supports up to four Intel® 64-bit Xeon® processor(s) of the same type below:
- Dual-Core Intel® Xeon® Processor 7100 Series with 2MB L2 Integrated Advanced Transfer Cache
|
System Bus |
|
Operating System Software |
- Supports 64-bit Operating Systems
- Supports 32-bit Operating Systems
|
|
|
Memory Capacity |
- Sixteen 240-pin DIMM sockets
- Supports up to 64GB ECC DDR2 400MHz memory
- Dual channel memory bus
- Memory must be populated in pairs and all be of same type
- Single-rank modules are recommended for 6+ DIMM support
|
Memory Type |
- DDR2 400MHz registered ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
|
DIMM Sizes |
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 Single Device Data Correction (SDDC)
|
|
|
Chipset |
- Intel® E8501 chipset
- MCH + ICH5R + PXH + 82571
|
SATA |
- ICH5R SATA Controller
- RAID 0, 1, JBOD support
|
SCSI |
- Adaptec AIC-7902 Controller
- Dual-Channel Ultra320 SCSI (Host RAID only supports 4 drives)
- Host RAID 0, 1, 10, JBOD support
|
RAID |
- Support for Zero-Channel RAID with Supermicro All-In-One ZCR Card: AOC-LPZCR1 ZCR Card
- (Card NOT included)
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- AOC-IPMI20-E (Included)
|
Network Controllers |
- Dual Intel® 82571EB Single Port PCI-e Gigabit Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
Graphics |
- ATI ES1000 SVGA PCI video controller with 16 MB of video memory
|
Super I/O |
|
|
|
Serial ATA |
- Two Serial ATA ports
- Two SATA hard drives supported
|
IDE |
- Dual EIDE channels support up to four UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
Floppy |
- 1 Floppy controller; 1.44 MB
|
LAN |
|
USB |
- 2x USB rear ports
- 2x USB internal headers
- USB 2.0 Compliant / 1.1 Compliant
|
VGA |
|
Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
Serial Port / Header |
- 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header
|
|
|
BIOS Type |
- 8Mb Flash EEPROM with Phoenix® BIOS
|
BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- SMBIOS 2.3
- DMI 2.3
- PCI 2.2
- ACPI 1.0
- ACPI 1.0 (limited)
- BIOS Rescue Hot Keys
- USB Keyboard Support
- Hardware BIOS Virus Protection
|
|
|
|
|
Form Factor |
- Tower / 4U Rackmountable
- Optional Rackmount Kit
(MCP-290-00001-00)
|
Model |
|
|
|
Height |
|
Width |
|
Depth |
|
Gross Weight |
|
Available Colors |
|
|
|
Buttons |
- Power On/Off button
- System Reset button
|
LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Fail LED
- Power Fail LED
|
Ports |
|
|
|
Hot-swap |
- 5x 3.5" Ultra320/160 Hard Drives
- Additional five 3.5" Ultra320/160 Hard Drives available with optional M35 Mobile Rack
|
Peripheral Bay(s) |
- 2x 5.25" Peripheral Drive Bay
- 1x 5.25" Bay For Floppy Drive
|
|
|
Floppy |
|
|
|
PCI-Express |
- 1 x8 (in x16) PCI-e slot
- 1 x4 (in x8) PCI-e slot
|
PCI-X |
- 3x 64-bit 133MHz PCI-X (3.3V) slots
- 1x 64-bit 100MHz PCI-X (3.3V) slot
|
|
|
U320 SCSI Hard Drive Backplane |
|
|
Fans |
- 3x 5000 RPM Hot-Swappable Cooling Fans
- 3x 5000 RPM Hot-Swappable Rear Exhaust Fan
|
Shrouds |
|
|
|
2x hot-swap high-efficiency 1200W power supply w/ PFC, PMBus |
AC Input |
- 100 - 40V, 50 - 60Hz, 11 - 7.5Amp
- 180 - 240V, 50 - 60Hz, 8 - 5Amp
|
1200W |
+5V standby |
|
+12V |
|
900W |
+5V standby |
|
+12V |
|
|
|
CPU |
- Monitors for CPU Cores, +3.3V, +5V, ±12V & +3.3V Standby
- CPU Core 5-Phase-switching voltage regulator with auto-sense from 0.86V-1.63V
|
FAN |
- Total of nine 4-pin and four 3-pin fan headers
- 9x fans with status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Supports 3-pin Fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connector
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 6x Fan Connectors
- I2C Temperature Sensing Logic
- Thermal Monitor 2 support
|
LED |
|
Other Features |
- Chassis intrusion detection
- Chassis intrusion header
- SDDC
|
Environmental Spec. |
- Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|