|
SBI-7125C-T3 |
- Processor Blade SBI-7125C-T3 (Black)
|
|
|
Super B7DCL |
|
|
CPU |
- Dual 771-pin LGA Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Quad-Core Intel®
Xeon®Processor 5400/5300 sequence (Harpertown /Clovertown processor)
- Dual-Core Intel®
Xeon®Processor 5200/5100/5000 sequence (Wolfdale /Woodcrest/Dempsey processor)
|
System Bus |
- 1333 / 1066 MHz system bus
|
Operating System Software |
- Supports 64-bit Operating Systems
- Supports 32-bit Operating Systems
|
|
|
Memory Capacity |
- Six 240-pin DIMM sockets
- Supports up to 48GB 667/533MHz DDR2 ECC Registered memory
- Memory must be populated in pairs
|
Memory Type |
- 667/533MHz Registered DDR2 ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
|
DIMM Sizes |
- 512MB, 1GB, 2GB, 4GB, 8GB
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
|
|
Chipset |
- Intel® 5100 (San Clemente) chipset
- Intel® ICH9R
|
SATA |
- Intel ICH9R SB SATAII Controller
- RAID 0, 1 support
|
IPMI |
- Support for Intelligent Platform Management Interface (IPMI) v.2.0 via Chassis Management Module (CMM)
- Note: Support 1 CMM
|
Network Controllers |
- Intel® 82575EB Gigabit Ethernet Controller
- Intel® I/OAT support for fast, scaleable, and reliable networking
|
Super I/O |
|
Clock Generator |
|
|
|
BIOS Type |
- 16Mb SPI EEPROM with Phoenix ® BIOS
|
BIOS Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0/2.0
- ACPI 1.0 (limited)
- USB Keyboard support
- Hardware BIOS Virus protection
|
|
|
|
|
Height |
|
Width |
|
Depth |
|
Weight |
|
Available Colors |
|
|
|
Buttons |
- Power On/Off button
- KVM button
|
LEDs |
- Power LED
- UID / KVM LED
- Network Activity LED
- Fault LED
|
Connector |
- SUV (Serial/USB/Video) & KVM Connector
|
|
|
Hot-swap |
- 3x 2.5" Hot-swap drive bays
|
|
|
KVM |
- 1 Front Connector for Supermicro KVM Card
|
|
Environmental Spec. |
- Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|
United States / Canada |
- FCC- Emissions (US) Verification
|
Europe |
- EN55022 - Emissions
- EN55024 - Immunity
- EN61000-3-2 - Harmonics
- EN61000-3-3 - Voltage Flicker
- CE - EMC Directive 89/336/EEC
|
|
United States / Canada |
- UL60950-1 - CSA/CUL 60950-1
|
Europe |
- EN60950-1, CE - Low Voltage Directive 73/23/EEE
|
Germany |
|
|