 |
| SBI-7126TG |
- GPU SuperBlade SBI-7126TG (Black)
|
| |
|
Super B8DTG |
| |
|
| CPU |
- Dual 1366-pin LGA Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Intel® Xeon® Processor X5600/E5600/L5600 Series
(Westmere) 40W - 95W
- Intel® Xeon® Processor X5500/E5500/L5500 Series
(Nehalem-EP) 38W - 95W
|
| GPU |
- Supports up to two NVIDIA Tesla M2050 and M2070 GPUs based on the CUDA Fermi architecture.
- Each GPU provides 448 CUDA cores and up to 6GB of GDDR5 memory.
|
| |
|
| Memory Capacity |
- 6x 240-pin DIMM sockets
- Supports up to 96 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
- Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC Unbuffered memory
- Memory Mirroring supported
|
| Memory Type |
- 1333 / 1066 / 800MHz ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 1GB, 2GB, 4GB , 8GB , 16GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
| |
|
| Chipset |
- Intel® 5520 (Tylersburg) chipset
- ICH10 + IOH-36D
|
| InfiniBand Support |
- 4x QDR/DDR (40/20Gb/s) InfiniBand mezzanine HCA (Optional)
|
| IPMI |
- Support for Intelligent Platform Management Interface (IPMI) v.2.0 via Chassis Management Module (CMM)
|
| Network Controllers |
- Intel® 82576 Dual-Port Gigabit Ethernet
- Intel® I/OAT 3 support for fast, scaleable, and reliable networking
- VMDq support for better performance of virtualization
|
| Super I/O |
|
| Clock Generator |
|
| |
|
| BIOS Type |
- 32Mb SPI Flash EEPROM with AMI® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
|
 |
|
|
| Height |
|
| Width |
|
| Depth |
|
| Weight |
|
| Available Colors |
|
| |
|
| Buttons |
- Power On/Off button
- KVM button
|
| LEDs |
- Power LED
- UID / KVM LED
- Network Activity LED
- Fault LED
|
| Connector |
- SUV (Serial/USB/Video) & KVM Connector
|
| |
|
| PCI-Express |
- 2 (x16) PCI-E 2.0 (FH/HL) OR
- 4 (x8) PCI-E 2.0 (FH/HL)
- (Optional) supports up to 2x Fermi 2070/2050 GPUs (not included)
|
| |
|
| Hot-swap |
|
| |
|
| KVM |
- 1 Front Connector for Supermicro KVM Card
|
| |
| Environmental Spec. |
- Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
| |
| United States / Canada |
- FCC- Emissions (US) Verification
|
| Europe |
- EN55022 - Emissions
- EN55024 - Immunity
- EN61000-3-2 - Harmonics
- EN61000-3-3 - Voltage Flicker
- CE - EMC Directive 89/336/EEC
|
| |
| United States / Canada |
- UL60950-1 - CSA/CUL 60950-1
|
| Europe |
- EN60950-1, CE - Low Voltage Directive 73/23/EEE
|
| Germany |
|
|
Купить / Заказать / Узнать цену
