Sun Netra CP3020 Blade . Rackmount . Sun . Серверы рабочих групп . Серверы HPE, IBM, Dell, Sun, SuperMicro, FSC, Intel
Sun Netra CP3020 Blade
The Sun Netra CP3020 Opteron ATCA Blade brings the efficiency of AMD's x64 processor technology to the ATCA form factor. This single- or dual-core AMD Opteron processor-based blade outperforms competing Xeon-based ATCA blades by up to 10 percent. This blade consumes so little power it can offer two 2.5-inch SAS hard drives, two expansion slots, compact flash support, and double the number of memory slots found on competing Intel-based ATCA blades - all within the defined ATCA power budget. Plus, the Netra CP3020 Blade offers support for both the Solaris OS and carrier-grade Linux.
At a Glance
-
Single- or dual-core AMD Opteron processor
-
Choice of Solaris 10 OS or MontaVista Linux
-
Linux support direct from Sun
-
4 DIMM slots support up to 8 GB main memory
-
Support for 2 GB compact flash memory
-
Support for up to two 2.5-inch SAS hard drives
-
2 PMC expansion slots
-
Common Rear Transition Module (RTM) connector simplifies cabling
-
Simplified management via PICMG 3.0
Key Specifications
-
Single- or dual-core AMD Opteron processor
-
Choice of Solaris or MontaVista Linux operating systems
-
4 DIMM slots support up to 8 GB main memory
-
Supports up to 8 GB compact flash
|
Architecture |
64-bit x86, PICMG 3.0/3.1-compliant |
|
Processor options |
Single-socket-940 AMD Opteron processor (100 series); single-core and dual-core-capable |
|
Speed |
1.8 and 2.2 GHz |
|
Main memory |
Up to four DDR-1 VLP DIMM slots; one GB,or two GB per DIMM; four or eight GBmax.memory |
|
Cache |
L2 1 MB, 64 KB instruction cache, 64 KB data cache |
|
Internal disk storage |
Two 73-GB drives |
|
Removable media devices |
256-2 GB Compact Flash |
|
Disk controller |
LSI 1064 SAS/SATA controller chip |
|
Operating system support |
Solaris 10 OS x64, MontaVista Linux |
|
Network |
Two 10/100/1000Base-T management ports, two 1000Base-T Base Fabric, two 1000-series Extended Fabric; one RS-232C Serial Port, parallel N/A |
|
I/O interfaces |
Two 10/100/1000Base-T management ports, two 1000Base-T Base Fabric, two 1000-series Extended Fabric; one RS-232C Serial Port, parallel N/A |
|
Ports |
Two SAS ports on rear panel |
|
System management |
PICMG 3.0 Base specification |
|
PCI |
Two 33 MHz, 64-bit, 3.3 V signalling only ASICs |
|
Serial port |
One asynchronous serial port available on front or on rear (via RTM) |
|
Connectors |
Front I/O ports, RS-232 Serial Interface (RJ45); dual 10/100Base-T management ports Rear requires optional rear transition module, PMCs |
|
Front panel LED |
Power, hot-swap, alarm/user |
|
8-U, single-slot ATCA |
|
Height |
322.25mm |
|
Width |
280mm |
|
Depth |
30.48mm |
|
Rackmounting |
Fits 19-inch, 23-inch, 24-inch, and 600mm racks |
|
Operating temperature |
5° C to 40° C (41° F to 104° F) five to 85 percent relative humidity, noncondensing short term. -5° C to 55° C (23° F to 131° F) five to 90 percent relative humidity, noncondensing, but not to exceed 0.024 kg water/kg dry air (0.053 lb.water/2.205 lb. dry air) |
|
Nonoperating temperature |
5° C to 40° C (41° F to 104° F) five to 85 percent relative humidity, noncondensing short term. -5° C to 55° C (23° F to 131° F) five to 90 percent relative humidity, noncondensing, but not to exceed 0.024 kg water/kg dry air (0.053 lb.water/2.205 lb. dry air) |
|
Cooling |
Available upon request |
|
Power |
200 W output power, -48 V |
|
Seismic |
Meets GR-63-CORE requirements for earthquake risk Zone 4 |
|
Acoustic |
Declared noise emissions in accordance with ISO 9296: 7.0 B (operating and idling) |
|
Regulatory Compliance |
TUV GS-EN60950 (CE)Class A FCC, CE, VCCI, BSMI, C-Tick, MIC, CCC, GOST |
|
Safety and ergonomics |
cULus, TUV GS, CB scheme with all national differences CE, CCC, GOST R, S-MARK
UL/CUL-UL 60950, CSA C22.2 No. 950 CB Scheme- IEC950 with all country deviations, TUV GSEN60950 (CE) and EN29241 Ergonomics GOST R |
|
Warranty |
One year, return to Sun |