|
SYS-1026T-URF4+ |
- SuperServer 1026T-URF4+ (Black)
|
|
|
CPU |
- Dual 1366-pin LGA Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Intel® Xeon® Processor X5600/E5600/L5600 Series
(Westmere) 40W - 130W
- Intel® Xeon® Processor X5500/E5500/L5500 Series
(Nehalem-EP) 38W - 95W
|
QPI |
|
|
|
Memory Capacity |
- 18x 240-pin DIMM sockets
- Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
- Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
- Memory Mirroring supported
|
Memory Type |
- 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
DIMM Sizes |
- 1GB, 2GB, 4GB , 8GB , 16GB
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
|
|
Chipset |
- Intel® 5520 (Tylersburg) chipset
- ICH10R
|
SATA |
- Intel ICH10R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Winbond® WPCM450 BMC
|
Network Controllers |
- 2x Intel® 82576 Dual-Port Gigabit Ethernet Controllers (4 ports)
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT 3 support for fast, scaleable, and reliable networking
- VMDq support for better performance of virtualization
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
Graphics |
|
Super I/O |
|
|
|
Serial ATA |
- Six Serial ATA ports
- Six SATA hard drives supported
|
LAN |
- 4x RJ45 LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB |
- 2x USB rear ports
- 1x USB on-board
- 4x USB internal headers
- Total 7 USB 2.0 Compliant
|
VGA |
|
Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
Serial Port / Header |
- 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header (Option)
|
|
|
|
|
Form Factor |
|
Model |
|
|
|
Height |
|
Width |
|
Depth |
|
Gross Weight |
|
Available Colors |
|
|
|
Buttons |
- Power On/Off Button
- System Reset Button
- UID Button
|
LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Universal Information (UID) LED
|
|
|
Left Slot |
- 1 (x16) PCI-E 2.0 slot
- 1 UIO
|
Right Slot |
- 1 (x8) PCI-E 2.0 (Low-Profile - 5.6" depth)
|
|
|
Hot-swap |
- 8x 2.5" SAS / SATA Hot-swap drive trays
|
|
|
DVD-ROM |
- Slim 8x DVD, 24x CD, DVD-ROM drive
|
|
|
1U SAS / SATA Backplane w/ SES2 Enclosure Management |
|
|
Fans |
|
Shroud |
|
|
|
700W/750W Redundant AC-DC high-efficiency power supply with PMBus and I2C |
AC Input |
- 700W: 100-140 V, 50-60 Hz, 8.5-6 Amp
- 750W: 180-240 V, 60-50 Hz, 5-3.8 Amp
|
DC Output +5V standby |
|
DC Output +12V |
- 700W: 58 Amp @ 100-140V
- 750W: 62 Amp @ 180-240V
|
With Power Distributor |
- +5V: 25 Amp
- +3.3V: 25 Amp
- -12V: 0.6 Amp
|
Certification |
80PLUS Gold Certified |
|
|
BIOS Type |
- 32Mb SPI Flash EEPROM with AMI® BIOS
|
BIOS Features |
- Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
|
|
RoHS
|
|
Environmental Spec. |
- Operating Temperature: 10° to 35°C (50° to 95°F)
- Non-operating Temperature: -40° to 70°C (-40° to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|