|
AS-1022TC-IBQF |
- A+ Server 1022TC-IBQF (Black)
|
|
|
Super H8DCT-IBQF |
|
|
CPU |
- Single 1207-pin Socket C32
- Supports one Six/Four-Core ready AMD Opteron 4100 Series processors
|
Chipset |
- AMD SR5670 + SP5100 Chipset
|
|
|
Memory Capacity |
- Twelve DIMM sockets
- Support up to 128GB U/RDDR3 ECC 1066/1333 MHz memory
- Dual channel memory bus
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
- See Detailed Memory Support Matrix
|
Memory Type |
- DDR3 1066/1333 MHz Registered ECC or Unbuffered ECC/non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
|
DIMM Sizes |
|
Memory Voltage |
|
|
|
Infiniband |
- Mellanox ConnectX QDR Infiniband 40Gbps Controller
|
SATA |
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Winbond® WPCM450 BMC
|
Network Controllers |
- Intel® 82576 controller, Dual-Port
Gigabit Ethernet
- 10/100/1000BASE-T support
|
VGA |
|
Super I/O |
|
|
|
SATA |
|
LAN |
- 2 RJ45 LAN ports
- 1 RJ45 Dedicated LAN supports IPMI
|
USB |
- 4x USB 2.0 ports
- 2x Rear, 1x header (2 ports)
|
VGA |
|
Serial Ports |
- 1x Fast UART 16550 serial port
|
|
|
PCI-E |
- 1 Low Profile PCI-E Gen2.0 x16 expansion slot
|
|
|
BIOS Type |
- 16Mb SPI Flash ROM with AMI® BIOS
|
BIOS Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3
|
|
|
|
|
Form Factor |
|
Model |
|
|
|
Height |
|
Width |
|
Depth |
|
Gross Weight |
|
Available Colors |
|
|
|
Buttons |
- Power On/Off button
- System Reset button
|
LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
|
Ports |
|
|
|
Hot-swap |
- 4x 3.5" SATA hard drive bays
- Enterprise SATA HDD only recommended
|
|
|
Fans |
- 6x counter-rotating PWM fans w/ Optimal Fan Speed Control
|
|
|
920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2C |
AC Input |
- 100-240 V, 50-60 Hz, 11-4.5 Amp
|
DC Output |
- 4 Amp @ +5V standby
- 75 Amp @ +12V
|
With Power Distributor |
- +5V: 50 Amp
- +3.3V: 30 Amp
- -12V: 0.6 Amp
|
Certification |
80PLUS Platinum Certified [ Test Report ] |
|
|
CPU |
- Monitors CPU Core Voltages, +3.3V, +5V, +12V, 5V Standby, VBAT
- Monitor for HyperTransport voltage 1.2V, DDR termination 1.25V
- CPU 4-phase Switching Voltage Regulator
|
FAN |
- Total up to five 4-pin fan headers
- 6 Fan Status Tachometer monitoring
- Status Monitor for Speed Control
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip support
- I2C temperature sensing logic
|
LED |
- CPU / Overheat LED
- Suspend-state indicator LED
- +5V Standby Alert LED
|
Other Features |
- Chassis Intrusion Header
- Chassis Intrusion Detection
- Chipkill Support
|
|