|
SYS-2016Ti-HTRF |
- SuperServer 2016Ti-HTRF (Black)
|
|
|
4x Super X8SIT-HF |
|
|
CPU |
- LGA 1156 Socket
- Intel® Xeon® X3400 series
- Intel® Xeon® L3400 series
- Intel® Core™ i3
- Intel® Pentium® G6950
- Intel® Celeron® G1101
|
|
|
Memory Capacity |
- 6x 240-pin DDR3 DIMM sockets
- Supports up to 32 GB DDR3 ECC Registered memory (RDIMM) in 6 DIMM sockets
- Supports up to 16 GB DDR3 ECC Un-Buffered memory (UDIMM) in 4 DIMM sockets
- 1333 / 1066 / 800 MHz
- Dual Core processors of Ci3 and Pentium: support ECC UDIMM only
|
Memory Type |
- 1333 / 1066 / 800 MHz ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
DIMM Sizes |
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
|
|
Chipset |
|
SATA |
- 6x SATA (3 Gbps)
- RAID 0, 1, 5, 10 support (Windows)
- RAID 0, 1, 10 support (Linux)
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
Network Controllers |
- High Performance Intel® 82576BE Dual Port Gigabit LAN
- Virtual Machine Device Queues High efficient I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
VGA |
|
Super I/O |
|
|
|
Serial ATA |
- Six Serial ATA ports
- 6 SATA hard drives supported
|
LAN |
- 2x RJ45 LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB |
- 2 rear + 1 header (2 Ports)
- 4 total USB ports, 2.0 Compliant / 1.1 Compliant
|
VGA |
|
Serial Port |
- 1 Fast UART 16550 serial port
|
|
|
BIOS Type |
- 32Mb SPI Flash EEPROM with AMI BIOS
|
BIOS Features |
- DMI 2.3
- PCI 2.3
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
|
|
|
|
Form Factor |
|
Model |
|
|
|
Height |
3.47" (88mm) |
Width |
17.25" (438mm) |
Depth |
28.5" (724mm) |
Gross Weight |
85 lbs (38.6kg) |
Available Colors |
Black |
|
|
Buttons |
- Power On/Off button
- UID button
|
LEDs |
- Power status LED
- UID LED
- Network activity LED
- System overheat/fan fail/power fail LED
|
|
|
PCI-Express |
- 1x Low Profile PCI-E (x16) AOC slot
|
|
|
Hot-swap |
- 6x 2.5" Hot-swap SATA drive bays
- Enterprise SATA HDD only recommended
|
|
|
Fans |
|
|
|
920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2C |
AC Input |
- 100-240 V, 50-60 Hz, 11-4.5 Amp
|
DC Output |
- 4 Amp @ +5V standby
- 75 Amp @ +12V
|
With Power Distributor |
- +5V: 50 Amp
- +3.3V: 30 Amp
- -12V: 0.6 Amp
|
Certification |
80PLUS Platinum Certified [ Test Report ] |
|
|
CPU |
- Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
- CPU Core 6-Phase-switching voltage regulator
|
FAN |
- Total of four 4-pin PWM fans
- 4x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 4x Fan Connectors
- PSU I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
LED |
- Power Fail / Overheat LED
- Suspend-state Indicator LED
- UID LED
|
|
RoHS |
|
Environmental Spec. |
- Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|