 |
| SYS-7045A-3 |
- SuperServer 7045A-3 (Beige)
|
| SYS-7045A-3B |
- SuperServer 7045A-3B (Black)
|
| |
|
| CPU |
- Dual 771-pin LGA Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same
type below:
- Quad-Core Intel®
Xeon®Processor
5400/5300 sequence
(Harpertown
/Clovertown processor)
up to 3.16 GHz
- Dual-Core Intel®
Xeon®Processor 5200/5100/5000
sequence (Wolfdale
/Woodcrest/Dempsey processor) up to 3.40 GHz
|
| System Bus |
- 1333 / 1066 / 667 MHz system bus
|
| Operating System Software |
- Supports 64-bit Operating Systems
- Supports 32-bit Operating Systems
|
| |
|
| Memory Capacity |
- Eight 240-pin DIMM sockets
- Supports up to 32 GB 667 / 533MHz DDR2 ECC FB-DIMM memory
- Dual branch memory bus
- Memory must be populated in pairs
- Memory Mirroring supported
|
| Memory Type |
- 667 / 533MHz FB-DIMM (Fully Buffered DIMM) DDR2 ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
| |
|
| Chipset |
- Intel® 5000X (GreenCreek) chipset
- MCH + PXH-V + ESB2
|
| SAS |
- Adaptec AIC-9410W Serial-Attached SCSI (SAS) Controller
- SAS Dual-Channel (internal)
- Each SAS channel supports up to 4 SAS / SATA drives for a total of up to 8 SAS or SATA hard drives
- Host RAID 0, 1, & 10 support
|
| RAID |
- Support for Zero-Channel RAID with Supermicro All-In-One-ZCR Card: AOC-LPZCR2
- RAID 0, 1, 5, 10
- Optional: (Card NOT included)
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- 200-pin IPMI slot (SIMLP)
- (Optional: AOC-SIMLP-B)
- (Optional: AOC-SIMLP-3) with 3rd LAN support
- NOTE: KVM-over-LAN not supported - there is no DVO signal to the IPMI slot
|
| Network Controllers |
- Intel® 82563EB Dual-Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT support for fast, scaleable, and reliable networking
|
| Super I/O |
|
| |
|
| PCI-Express |
- 1 (x16) PCI-e slot
- 1 (x4) PCI-e (using x16) slot
|
| PCI-X |
- 2x 64-bit 133/100MHz PCI-X (3.3V) slots
- 1x 64-bit 100MHz PCI-X (3.3V) slot
|
| PCI |
- 1x 32-bit 33MHz PCI (5V) slot
|
| |
|
| IDE |
- Single EIDE channel supports up to two UDMA IDE devices(IDE-M, IDE-S) including CF card
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
- Compact Flash (40-pin connector, IDE 1, single channel) slot
|
| Floppy |
- 1 Floppy controller; 1.44 MB, 2.88 MB
|
| LAN |
|
| USB |
- 4x USB rear ports
- 2x USB internal header
- 6 total USB ports, 2.0 Compliant / 1.1 Compliant
|
| Audio |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Port / Header |
- 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header
|
| Parallel Port |
- 1 ECP / EEP parallel port
|
|
 |
|
|
| Form Factor |
- 4U Rackmountable / Tower
- Optional Rackmount Kit (CSE-PT26)
|
| Model |
|
| |
|
| Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
| |
|
| Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Fail LED
- Power Fail LED
|
| Ports |
|
| |
|
| Hot-swap |
|
| Peripheral Bay(s) [90o Rotatable] |
- 2x 5.25" Peripheral Drive Bay
- 1x 5.25" Bay For Floppy Drive
|
| |
|
| Floppy |
- Panasonic 3.5" 1.44MB Floppy Drive
|
| |
|
| SC743 SAS / SATA Backplane w/ Enclosure Management |
| |
|
| Fans |
- 4x 5000 RPM Hot-swappable PWM Cooling Fans
- 1x 4000 RPM Hot-Swappable Rear Exhaust PWM Fan
- 1x Air Shroud
|
| |
|
645W Low-Noise AC power supply with PFC
[ 24-pin, (4-pin, 8-pin) = 12V ] |
| AC Voltage |
- 100 - 240V, 50 - 60Hz, 11 - 5Amp
|
| DC Output |
|
| +5V |
|
| +5V standby |
|
| +12V |
|
| -12V |
|
| +3.3V |
|
| |
|
| CPU |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, -12V & +5V Standby, VBAT
- CPU Core 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
| FAN |
- Total of eight 4-pin fans
- 8x fans with status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support for 3-pins (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis, environment
- CPU thermal trip support
- Thermal Control for 8x Fan Connectors
- PSU I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- CPU / System Overheat LED
- Suspend-state Indicator LED
- +5V Standby Alert LED
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
|
| |
|
| Environmental Spec. |
- Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
| |
|
| BIOS Type |
- 8Mb Flash EEPROM with Phoenix® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.3
- PCI 2.2
-
| |
Купить / Заказать / Узнать цену
